Knuckle Cracker Wiki

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.
====== sparticle-brush ======

A sand particle based terrain brush that can be run in the console and used to create intricate terrain patterns.

===== Examples =====

{{:ixe:tools:spartbrush_planet_large.png|A hollow planet with several layers.}}

===== Code =====
<code 4rpl>
# Sparticle brush
# Meant to run in the console. Add the script to your console folder as "spartbrush.irpl",
# Then run it with the command "run spartbrush"
# This is version 1. A more updated version may be available at https://github.com/qople/creeper-world-mods/blob/main/IXE/Console/spartbrush.irpl

$speed:1.0
$count:100
$angle:"AUTO" # auto
$spread:360
$minLifetime:150
$maxLifetime:180

if(<inputField StringLength)
	@AcceptInput
endif

if(<angle "AUTO" eq)
	# Auto angle 
	# This is needed to check if the mouse is moving, because for some reason 
	# the mouse vibrates almost exactly one cell per frame while held down.
	if(GetMousePos <lastPos Distance 1 sub abs 0.001 gte GetMousePos <lastPos neq &&)
		<lastPos GetMousePos sub >mouseDelta
		GetMousePos >lastPos
	endif
endif

if(0 1 GetMouseButton)
    <timer 1 add >timer
    # Pick sand randomly to create cool layers
    <times 0 do
        if(<times[i] <timer gte)
            i >index
            
            <times[i] >nextLayerTime
            <times[i 1 sub] >lastLayerTime
            break
        endif
    loop

    # Weighted rand based on percentage through the layer
	<nextLayerTime <lastLayerTime sub >layerDuration
    <timer <lastLayerTime sub >timeThroughLayer
    <timeThroughLayer AsFloat <layerDuration div >layerPortion
    if(RandFloat <layerPortion lt)
        <sands[<index] >sand
    else
        <sands[<index 1 sub] >sand
    endif

	GetMousePos >pos
	if(<angle "AUTO" eq)
		<mouseDelta Normalize >mouseDelta
		<mouseDelta EV2 swap atan2 rad2deg mul >spartAngle
	else
		<angle >spartAngle
	endif

	
	# Make the sparticle explosion.
	<count 0 do
		<spartAngle RandFloat 0.5 sub <spread mul add >tAngle
		<tAngle deg2rad mul cos <tAngle deg2rad mul sin V2 Normalize <speed mul <pos add >lastPos
		
		#<lastPos >data{"lastPos"}
		#RandInt(<minLifetime <maxLifetime) >data("maxage")
		Table(
			"sandDef"					<sand
			"pos"						<pos
			"lastPos"					<lastPos
			"color" 					<sand GetSandDefData{"color"}
			"maxAge"					RandInt(<minLifetime <maxLifetime)
			"ignoreOccupied"			false
			"createSandWhenOccupied"	true
		) >data
		


		CreateSandParticle(<data)
	loop

	# Built-in sparticle explosion, less control over velocity and no angle control
    #GetMouseCell EV2 <speed dup <count V4(1 0 1 1) V4(0 0 0 1) <minLifetime <maxLifetime <sand 0 false true CreateSandExplosion
else
    0 >timer
endif

# Concats the number you type to the input string and updates the UI text as necessary.
:AcceptInput
	if("Return" 0 GetKeyDown)
		if(<currentInput StringLength eq0)
			"0" >currentInput
			@UpdateFieldText
		endif
		@ConfirmInput
		#SendMsg("SPARTBRUSH_TOGGLEINPUT" TableN("name" <inputField 1))
	else
		10 0 do
			if("Alpha" i concat 0 GetKeyDown)
				<currentInput i concat AsFloat AsString >currentInput
			endif
		loop
	
		if("Period" 0 GetKeyDown <currentInput StringToList "." ListContains ! &&)
			<currentInput "." concat >currentInput
		endif
	
		# Special case for angle, let it be "AUTO" when A is pressed.
		if("A" 0 GetKeyDown <inputField "angle" eq &&)
			"AUTO" >currentInput
		endif
	
		if("Backspace" 0 GetKeyDown)
			<currentInput dup StringLength 1 sub 0 max 0 swap Substring AsFloat AsString >currentInput
		endif
		@UpdateFieldText
	endif

:UpdateFieldText
	<inputField "_" Split 0 GetListElement >shortName 
	<inputField @UiContainerForElement >container
	<container <inputField <varNameToUiText{<shortName} "<br>" <currentInput concat3 SetUiText

:Once
	"" >currentInput
	"" >inputField
	0 >numLayers
	-250 >layerUiYPos
	0 >layerUiXPos

	false TerpPaintingEnabled

	# Lookup table for filling in UI text
	Table(
		"speed" "Speed"
		"angle" "Angle"
		"count" "Count"
		"spread" "Spread"
		"minLifetime" "LT Min"
		"maxLifetime" "LT Max"
		"sandId" "Type"
		"layerDuration" "Duration"
	) >varNameToUiText

	ListN("sandId" "layerDuration" 2) >uiBlacklist

	# We always need the last element with 9999999... at the end 
	# so we never actually reach the end and try to index out of bounds or something.
    List(9999999) >times
	CreateList >lengths
    List(0) >sands
    CreateUI("spartbrush" @UI CreateTable) >result >resultString
	RegisterForMsg("SPARTBRUSH_TOGGLEINPUT" "ToggleInput")
	RegisterForMsg("SPARTBRUSH_ADDLAYER" "AddLayer")
	RegisterForMsg("SPARTBRUSH_REMOVELAYER" "RemoveLayer")
	@AddLayer

	Trace(@Helptext)

# Toggles accepting input from the player
:ToggleInput
	<_DATA >uiTable

	if(<inputField StringLength)
		# We're already typing, there are some options for what to do here.
		if(<uiTable{"name"} <inputField neq)
			# Selecting a new UI element, so we switch to the newly selected element.
			@ConfirmInput
			<uiTable{"name"} >inputField
			<inputField @ValueFromField AsString >currentInput
			"" >currentInput
			<inputField dup @UiContainerForElement swap V4(0.2 1 0.2 1) SetUiBackgroundColor
		else
			# Deselecting the old UI element, just deselect the old one
			@ConfirmInput
		endif
	else
		# Starting typing
		<uiTable{"name"} >inputField
		<inputField @ValueFromField AsString >currentInput
		"" >currentInput
		<inputField dup @UiContainerForElement swap V4(0.2 1 0.2 1) SetUiBackgroundColor
	endif

# Saves the input to the proper place
:ConfirmInput
	<inputField dup @UiContainerForElement swap V4(0.572 0.337 0.196 1) SetUiBackgroundColor

	if(<inputField "sandId" StartsWith)
		<inputField 7 <inputField StringLength 7 sub Substring AsInt >index
		<currentInput AsInt >sands[<index]
	else if(<uiName "layerDuration" StartsWith)
		<inputField 14 <inputField StringLength 14 sub Substring AsInt >index
		<currentInput AsInt >lengths[<index]
	else
		# Just store to the matching var
		<currentInput 
		if(<inputField "A" neq)
			asfloat
		endif
		<inputField ->!
	endif endif
	@BuildLayerLists
	<varNameToUiText GetTableKeys >keys
	<keys 0 do
		if(<uiBlacklist <keys[i] ListContains !)
			<keys
		endif
	loop
	

	"" >inputField


# Gets the integer value stored in the field
:ValueFromField
	>uiName
	if(<uiName "sandId" StartsWith)
		<sands <uiName 7 <uiName StringLength 7 sub Substring AsInt GetListElement
	else if(<uiName "layerDuration" StartsWith)
		<lengths <uiName 14 <uiName StringLength 14 sub Substring AsInt GetListElement
	else
		<uiName <-!
	endif endif

# Gets the parent UI container based on the UI name and the naming convention of this script.
:UiContainerForElement
	>uiName
	if(<uiName "sandId" StartsWith)
		"spartbrush_layer" <uiName 7 <uiName StringLength 7 sub Substring concat
	else if(<uiName "layerDuration" StartsWith)
		"spartbrush_layer" <uiName 14 <uiName StringLength 14 sub Substring concat
	else
		"spartbrush"
	endif endif

# Clean up UI when the script is done.
:Destroyed
	true TerpPaintingEnabled
    DestroyUI("spartbrush")
	<numLayers 0 do
		"spartbrush_layer" i concat DestroyUI
	loop


# Makes a new layer and matching UI element.
# It would probably be easier to just copy-paste like 20 UI elements in and enable them as we need
# But this is cooler, and lets us adjust to wrap around the screen in different resolutions. 
:AddLayer
	#Make the UI
	"{
		'anchor': [0, 1],
		'pos': [0, -42],
		'pivot': [0, 1],
		'width': 1,
		'height': 1,
		'bgcolor': '#00000000',
		'Components': 	[
" 							@LayerJSON "
						]
	}" concat3 >layerJson
	"spartbrush_layer" <numLayers concat <layerJson CreateTable CreateUI
	
	# Add the layer to the code
	# The data structure is actually built from the UI text, so now that we have the UI it's pretty simple.
	<numLayers 1 add >numLayers
	<sands dup GetListCount 1 sub 0 InsertListElement
	<lengths 100 AppendToList
	@BuildLayerLists
	
	# Move where the next layer gets made
	<layerUiYPos 50 sub >layerUiYPos

	if(<layerUiYPos neg GetScreenSize[1] 200 sub gt)
		-250 >layerUiYPos
		<layerUiXPos 330 add >layerUiXPos
	endif

# Removes the last layer
:RemoveLayer
	if(<numLayers)
		<numLayers 1 sub >numLayers
		"spartbrush_layer" <numLayers concat DestroyUI
		
		# Update the lists
		<sands dup GetListCount 2 sub RemoveListElement
		<lengths PopList pop
		@BuildLayerLists

		<layerUiYPos 50 add >layerUiYPos
		if(<layerUiYPos -250 gt <layerUiXPos gt0 &&)
			GetScreenSize[1] >screenHeight
			<screenHeight 200 sub 250 sub 50 div >layersPerColumn
			-250 50 <layersPerColumn AsInt mul sub >layerUiYPos
			<layerUiXPos 330 sub >layerUiXPos
		endif
	endif

# Makes the layer lists
:BuildLayerLists
	0 1 ListN >times
	0 >lastTime
	<lengths 0 do
		<times <lastTime <lengths[i] add dup >lastTime AppendToList
	loop
	<times 999999999 AppendToList
	
	<sands[<numLayers 1 sub] >sands[<numLayers] 

# Speed
# Angle
# Spread
# Lifetime
# Lifetime spread
# Add sand type
# For each sand type:
#   id
#   duration
:UI
	"{
		'anchor': [0, 1],
		'pos': [0, -42],
		'pivot': [0, 1],
		'width': 1,
		'height': 1,
		'bgcolor': '#00000000',
		'Components': 	[
							{
								'type':'button', 'name':'speed', 'anchor': [0, 1],'pivot': [0, 1], 'width': 110, 'height': 50, 
								'pos': [0,0], 
								'text': 'Speed\n1', 'tooltip': 'How fast sparticles are launched.', 'bgcolor': '#925632', 'color': '#FFFFFF', 'events': ['SPARTBRUSH_TOGGLEINPUT'],
							},	
							{
								'type':'button', 'name':'count', 'anchor': [0, 1],'pivot': [0, 1], 'width': 110, 'height': 50, 
								'pos': [110,0], 
								'text': 'Count\n100', 'tooltip': 'How many sparticles are launched each frame.', 'bgcolor': '#925632', 'color': '#FFFFFF', 'events': ['SPARTBRUSH_TOGGLEINPUT'],
							},	
                            {
								'type':'button', 'name':'angle', 'anchor': [0, 1],'pivot': [0, 1], 'width': 110, 'height': 50, 
								'pos': [0,-50], 
								'text': 'Angle\nAUTO', 'tooltip': 'Angle sparticles are launched at. Entering `A` follows mouse movement automatically.', 'bgcolor': '#925632', 'color': '#FFFFFF', 'events': ['SPARTBRUSH_TOGGLEINPUT'],
							},	
                            {
								'type':'button', 'name':'spread', 'anchor': [0, 1],'pivot': [0, 1], 'width': 110, 'height': 50, 
								'pos': [110,-50], 
								'text': 'Spread\n360', 'tooltip': 'Spread of the sparticle spray in degrees.', 'bgcolor': '#925632', 'color': '#FFFFFF', 'events': ['SPARTBRUSH_TOGGLEINPUT'],
							},	
                            {
								'type':'button', 'name':'minLifetime', 'anchor': [0, 1],'pivot': [0, 1], 'width': 110, 'height': 50, 
								'pos': [0,-100], 
								'text': 'LT Min\n150', 'tooltip': 'Minimum lifetime of a sparticle, in frames. 30 = 1 sec.', 'bgcolor': '#925632', 'color': '#FFFFFF', 'events': ['SPARTBRUSH_TOGGLEINPUT'],
							},	
                            {
								'type':'button', 'name':'maxLifetime', 'anchor': [0, 1],'pivot': [0, 1], 'width': 110, 'height': 50, 
								'pos': [110,-100], 
								'text': 'LT Max\n180', 'tooltip': 'Maximum lifetime of a sparticle, in frames. 30 = 1 sec.', 'bgcolor': '#925632', 'color': '#FFFFFF', 'events': ['SPARTBRUSH_TOGGLEINPUT'],
							},	





                            {
								'type':'button', 'name':'addLayer', 'anchor': [0, 1],'pivot': [0, 1], 'width': 110, 'height': 50, 
								'pos': [0,-200], 
								'text': 'ADD\nLAYER', 'tooltip': 'Adds a sand layer. Sand types for layers are blended between as the mouse is held down.', 'bgcolor': '#925632', 'color': '#FFFFFF', 'events': ['SPARTBRUSH_ADDLAYER'],
							},	
                            {
								'type':'button', 'name':'removeLayer', 'anchor': [0, 1],'pivot': [0, 1], 'width': 110, 'height': 50, 
								'pos': [110,-200], 
								'text': 'REMOVE LAYER', 'tooltip': 'Removes the bottom sand layer. Sand types for layers are blended between as the mouse is held down.', 'bgcolor': '#925632', 'color': '#FFFFFF', 'events': ['SPARTBRUSH_REMOVELAYER'],
							},	
                        ]
    }"

:LayerJSON
	"
							{
								'type':'button', 'name':'sandId_" <numLayers "', 'anchor': [0, 1],'pivot': [0, 1], 'width': 110, 'height': 50, 
								'pos': [" <layerUiXPos "," <layerUiYPos "], 
								'text': 'Type\n0', 'tooltip': 'The sand slot # for this sand layer', 'bgcolor': '#925632', 'color': '#FFFFFF', 'events': ['SPARTBRUSH_TOGGLEINPUT'],
							},	
							{
								'type':'button', 'name':'layerDuration_" <numLayers "', 'anchor': [0, 1],'pivot': [0, 1], 'width': 110, 'height': 50, 
								'pos': [" <layerUiXPos 110 add "," <layerUiYPos "], 
								'text': 'Duration\n100', 'tooltip': 'How long to take to blend through this layer, in frames.', 'bgcolor': '#925632', 'color': '#FFFFFF', 'events': ['SPARTBRUSH_TOGGLEINPUT'],
							}" concat4 concat4 concat4 concat4

:Helptext
"
Sparticle Brush V1

Throws sparticles out from the cursor to make intricate terrain patterns.

Can blend through several terrain types over time.

Tooltips on the buttons explain what they do.

Here are some things you can try to affect how it looks:
- Change sparticle gravity.
- Place down a bunch of sparticles while paused, then unpause to shoot them all at once.
- Change sand support min to 0 so nothing decays, or up to 2-4 to decay more terrain.
- Change terrain slot 2 (sand)'s simulation type to 'none' while sand support is high so sand doesn't build up."
</code>
Knuckle Cracker Wiki

User Tools

Site Tools

Page Tools
